Enhanced Solubility and Bioavailability of Clotrimazole in Aqueous Solutions with Hydrophobized Hyperbranched Polyglycidol for Improved Antifungal Activity.

The poor solubility of clotrimazole in the aqueous medium and the uncontrolled removal of the drug-loaded suppository content limit its effectiveness in the treatment of vulvovaginal candidiasis. We present here the aqueous formulations of clotrimazole in the form of non-Newtonian structured fluids, i.e., Bingham plastic or pseudoplastic fluids constructed of hyperbranched polyglycidol, HbPGL, with a hydrophobized core with aryl groups such as phenyl or biphenyl. The amphiphilic constructs were obtained by the modification of linear units containing monohydroxyl groups with benzoyl chloride, phenyl isocyanate, and biphenyl isocyanate, while the terminal 1,2-diol groups in the shell were protected during the modification step, followed by their deprotection. The encapsulation of clotrimazole within internally hydrophobized HbPGLs using a solvent evaporation method followed by water addition resulted in structured fluids formation. Detailed Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) analyses performed for aryl-HbPGLs with clotrimazole revealed the difference in drug compatibility among polymers. Clotrimazole in biphenyl-enriched HbPGL, unlike phenyl derivatives, was molecularly distributed in both the dry and the hydrated states, resulting in transparent formulations. The shear-thinning properties of the obtained fluid formulations make them injectable and thus suitable for the intravaginal application. Permeability tests performed with the usage of the Franz diffusion cell showed a 5-fold increase in the permeability constant of clotrimazole compared to drugs loaded in a commercially available disposable tablet and a 50-fold increase of permeability in comparison to the aqueous suspension of clotrimazole. Furthermore, the biphenyl-modified HbPGL-based drug liquid showed enhanced antifungal activity against both Candida albicans and Candida glabrata that was retained for up to 7 days, in contrast to the phenyl-HbPGL derivatives and the tablet. With their simple formulation, convenient clotrimazole/biphenyl-HbPGL formulation strategy, rheological properties, and enhanced antifungal properties, these systems are potential antifungal therapeutics for gynecological applications. This study points in the synthetic direction of improving the solubility of poorly water-soluble aryl-enriched pharmaceuticals.

Inhibition of hepatitis B virus via selective apoptosis modulation by Chinese patent medicine Liuweiwuling Tablet.

BACKGROUND: Liuweiwuling Tablet (LWWL) is a Chinese patent medicine approved for the treatment of chronic inflammation caused by hepatitis B virus (HBV) infection. Previous studies have indicated an anti-HBV effect of LWWL, specifically in terms of antigen inhibition, but the underlying mechanism remains unclear. AIM: To investigate the potential mechanism of action of LWWL against HBV. METHODS: In vitro experiments utilized three HBV-replicating and three non-HBV-replicating cell lines. The in vivo experiment involved a hydrodynamic injection-mediated mouse model with HBV replication. Transcriptomics and metabolomics were used to investigate the underlying mechanisms of action of LWWL. RESULTS: In HepG2.1403F cells, LWWL (0.8 mg/mL) exhibited inhibitory effects on HBV DNA, hepatitis B surface antigen and pregenomic RNA (pgRNA) at rates of 51.36%, 24.74% and 50.74%, respectively. The inhibition rates of LWWL (0.8 mg/mL) on pgRNA/covalently closed circular DNA in HepG2.1403F, HepG2.2.15 and HepG2.A64 cells were 47.78%, 39.51% and 46.74%, respectively. Integration of transcriptomics and metabolomics showed that the anti-HBV effect of LWWL was primarily linked to pathways related to apoptosis (PI3K-AKT, CASP8-CASP3 and P53 pathways). Apoptosis flow analysis revealed that the apoptosis rate in the LWWL-treated group was significantly higher than in the control group (CG) among HBV-replicating cell lines, including HepG2.2.15 (2.92% ± 1.01% vs 6.68% ± 2.04%, P < 0.05), HepG2.A64 (4.89% ± 1.28% vs 8.52% ± 0.50%, P < 0.05) and HepG2.1403F (3.76% ± 1.40% vs 7.57% ± 1.35%, P < 0.05) (CG vs LWWL-treated group). However, there were no significant differences in apoptosis rates between the non-HBV-replicating HepG2 cells (5.04% ± 0.74% vs 5.51% ± 1.57%, P > 0.05), L02 cells (5.49% ± 0.80% vs 5.48% ± 1.01%, P > 0.05) and LX2 cells (6.29% ± 1.54% vs 6.29% ± 0.88%, P > 0.05). TUNEL staining revealed a significantly higher apoptosis rate in the LWWL-treated group than in the CG in the HBV-replicating mouse model, while no noticeable difference in apoptosis rates between the two groups was observed in the non-HBV-replicating mouse model. CONCLUSION: Preliminary results suggest that LWWL exerts a potent inhibitory effect on wild-type and drug-resistant HBV, potentially involving selective regulation of apoptosis. These findings offer novel insights into the anti-HBV activities of LWWL and present a novel mechanism for the development of anti-HBV medications.

Development of Losartan Orally Disintegrating Tablets by Direct Compression: a Cost-Effective Approach to Improve Paediatric Patient's Compliance.

The development of suitable dosage forms is essential for an effective pharmacological treatment in children. Orally disintegrating tablets (ODTs) are attractive dosage forms that avoid swallowing problems, ensure dosage accuracy and are easy to administer as they disintegrate in the oral cavity. This study aimed to develop ODTs containing losartan potassium (LP) for the treatment of arterial hypertension in children. The ODTs, produced by the cost-effective manufacturing process of direct compression, consisted of a mixture of diluent, superdisintegrant, glidant and lubricant. Five superdisintegrants (croscarmellose sodium, two grades of crospovidone, sodium starch glycolate and pregelatinized starch) were tested (at two concentrations), and combined with three diluents (mannitol, lactose and sorbitol). Thus, thirty formulations were evaluated based on disintegration time, hardness and friability. Two formulations, exhibiting the best results concerning disintegration time (< 30 s), hardness and friability (≤ 1.0%), were selected as the most promising ones for further evaluation. These ODTs presented favourable drug-excipient compatibility, tabletability and flow properties. The in vitro dissolution studies demonstrated 'very rapid' drug release. Preliminary stability studies highlighted the requirement of a protective packaging. All quality properties retained appropriate results after 12 months of storage in airtight containers. In conclusion, the ODTs were successfully developed and characterised, suggesting a potential means to accomplish a final prototype that enables an improvement in childhood arterial hypertension treatment.

A new fluorescence probe for sofosbuvir analysis in dosage form and spiked human plasma.

A simple, rapid, and low-cost technique was developed to allow reliable analysis of the anti-hepatitis C drug sofosbuvir in bulk, tablet form, and spiked human plasma. This method depends on the ability of sofosbuvir to quench the fluorescence of the newly synthesized 2-amino-3-cyano-4,6-dimethylpyridine (reagent 3). Elemental analysis and spectral data were used to validate the structure of the synthesized reagent. The newly synthesized reagent exhibited a satisfactory level of fluorescence emission at 365 nm after excitation at 247 nm. All experimental variables that might affect the quenching process were analyzed and optimized. Linearity, range, accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ) were all validated in accordance with the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines. The concentration range was shown to be linear between 0.1 and 1.5 µg/mL. The technique was effectively utilized for sofosbuvir analysis in both its tablet dosage form and spiked human plasma, with mean percentage recoveries of 100.13 ± 0.35 and 94.26 ± 1.69, respectively.

Formulating biopharmaceuticals using three-dimensional printing.

Additive manufacturing, commonly referred to as three-dimensional (3D) printing, has the potential to initiate a paradigm shift in the field of medicine and drug delivery. Ever since the advent of the first-ever United States Food and Drug Administration (US FDA)-approved 3D printed tablet, there has been an increased interest in the application of this technology in drug delivery and biomedical applications. 3D printing brings us one step closer to personalized medicine, hence rendering the "one size fits all" concept in drug dosing obsolete. In this review article, we focus on the recent developments in the field of modified drug delivery systems in which various types of additive manufacturing technologies are applied.

Factor Analysis of Patients Who Find Tablets or Capsules Difficult to Swallow Due to Their Large Size: Using the Personal Health Record Infrastructure of Electronic Medication Notebooks.

BACKGROUND: Understanding patient preference regarding taking tablet or capsule formulations plays a pivotal role in treatment efficacy and adherence. Therefore, these preferences should be taken into account when designing formulations and prescriptions. OBJECTIVE: This study investigates the factors affecting patient preference in patients who have difficulties swallowing large tablets or capsules and aims to identify appropriate sizes for tablets and capsules. METHODS: A robust data set was developed based on a questionnaire survey conducted from December 1, 2022, to December 7, 2022, using the harmo smartphone app operated by harmo Co, Ltd. The data set included patient input regarding their tablet and capsule preferences, personal health records (including dispensing history), and drug formulation information (available from package inserts). Based on the medication formulation information, 6 indices were set for each of the tablets or capsules that were considered difficult to swallow owing to their large size and concomitant tablets or capsules (used as controls). Receiver operating characteristic (ROC) analysis was used to evaluate the performance of each index. The index demonstrating the highest area under the curve of the ROC was selected as the best index to determine the tablet or capsule size that leads to swallowing difficulties. From the generated ROCs, the point with the highest discriminative performance that maximized the Youden index was identified, and the optimal threshold for each index was calculated. Multivariate logistic regression analysis was performed to identify the risk factors contributing to difficulty in swallowing oversized tablets or capsules. Additionally, decision tree analysis was performed to estimate the combined risk from several factors, using risk factors that were significant in the multivariate logistic regression analysis. RESULTS: This study analyzed 147 large tablets or capsules and 624 control tablets or capsules. The "long diameter + short diameter + thickness" index (with a 21.5 mm threshold) was identified as the best indicator for causing swallowing difficulties in patients. The multivariate logistic regression analysis (including 132 patients with swallowing difficulties and 1283 patients without) results identified the following contributory risk factors: aged <50 years (odds ratio [OR] 1.59, 95% CI 1.03-2.44), female (OR 2.54, 95% CI 1.70-3.78), dysphagia (OR 3.54, 95% CI 2.22-5.65), and taking large tablets or capsules (OR 9.74, 95% CI 5.19-18.29). The decision tree analysis results suggested an elevated risk of swallowing difficulties for patients with taking large tablets or capsules. CONCLUSIONS: This study identified the most appropriate index and threshold for indicating that a given tablet or capsule size will cause swallowing difficulties, as well as the contributory risk factors. Although some sampling biases (eg, only including smartphone users) may exist, our results can guide the design of patient-friendly formulations and prescriptions, promoting better medication adherence.

Liquisolid Technique: A Novel Technique with Remarkable Applications in Pharmaceutics.

Recently, it has been observed that newly developed drugs are lipophilic and have low aqueous solubility issues, which results in a lower dissolution rate and bioavailability of the drugs. To overcome these issues, the liquisolid technique, an innovative and advanced approach, comes into play. This technique involves the conversion of the drug into liquid form by dissolving it in non-volatile solvent and then converting the liquid medication into dry, free-flowing, and compressible form by the addition of carrier and coating material. It offers advantages like low cost of production, easy method of preparation, and compactable with thermo labile and hygroscopic drugs. It has been widely applied for BCS II drugs to enhance dissolution profile. Improving bioavailability, providing sustained release, minimizing pH influence on drug dissolution, and improving drug photostability are some of the other promising applications of this technology. This review article presents an overview of the liquisolid technique and its applications in formulation development.

Rimegepant orally disintegrating tablet 75 mg for acute treatment of migraine in adults from China: a subgroup analysis of a double-blind, randomized, placebo-controlled, phase 3 clinical trial.

BACKGROUND: Rimegepant orally disintegrating tablet (ODT), an oral small-molecule calcitonin gene-related peptide receptor antagonist, is indicated for acute and preventive treatment of migraine in the United States and other countries. Previously, a large clinical trial assessed the efficacy and safety of rimegepant ODT 75 mg for the acute treatment of migraine in adults living in China or South Korea. A post hoc subgroup analysis of this trial was performed to evaluate the efficacy and safety of rimegepant for acute treatment of migraine in adults living in China. METHODS: Eligible participants were ≥ 18 years of age and had a ≥ 1-year history of migraine, with 2 to 8 attacks of moderate or severe pain intensity per month and < 15 headache days per month during the 3 months before screening. Participants self-administered rimegepant ODT 75 mg or matching placebo to treat a single migraine attack of moderate or severe pain intensity. The co-primary endpoints were pain freedom and freedom from the most bothersome symptom (MBS) at 2 h post-dose. Key secondary endpoints included pain relief at 2 h post-dose, ability to function normally at 2 h post-dose, use of rescue medication within 24 h post-dose, and sustained pain freedom from 2 to 24 h and 2 to 48 h post-dose. All p values were nominal. Safety was assessed via treatment-emergent adverse events (TEAEs), electrocardiograms, vital signs, and routine laboratory tests. RESULTS: Overall, 1075 participants (rimegepant, n = 538; placebo, n = 537) were included in the subgroup analysis. Rimegepant was more effective than placebo for the co-primary endpoints of pain freedom (18.2% vs. 10.6%, p = 0.0004) and freedom from the MBS (48.0% vs. 31.8%, p <  0.0001), as well as all key secondary endpoints. The incidence of TEAEs was comparable between the rimegepant (15.2%) and placebo (16.4%) groups. No signal of drug-induced liver injury was observed, and no study drug-related serious TEAEs were reported in the rimegepant group. CONCLUSIONS: A single dose of rimegepant 75 mg rimegepant was effective for the acute treatment of migraine in adults living in China, with safety and tolerability similar to placebo. TRIAL REGISTRATION: Clinicaltrials.gov NCT04574362 Date registered: 2020-10-05.

Long-term safety of desmopressin orally disintegrating tablets in men with nocturia due to nocturnal polyuria: Interim results of a specified drug use-results survey in Japan.

OBJECTIVES: This interim report presents the 12-week results of a post-marketing surveillance evaluating the safety of desmopressin orally disintegrating tablets 25 and 50 µg in Japanese men with nocturia due to nocturnal polyuria. METHODS: Of the planned study population of 1000 Japanese men receiving desmopressin for the first time for nocturia due to nocturnal polyuria, 971 cases were enrolled. In this interim analysis, 9 cases, including 6 registry violations and 3 cases of unconfirmed desmopressin dosing, were excluded from the 354 case report forms collected and fixed by the end of December 2021, and data up to 12 weeks after administration in 345 cases were defined as the safety analysis set. RESULTS: The mean age was 74.5 ± 9.9 years and 88.7% of the survey participants were aged ≥65 years. Desmopressin was started at a dose of 25 µg in 153 cases (44.3%). There were 102 adverse drug reactions (ADRs) reported in 71 cases, including 6 serious ADRs in 3 cases (0.9%). The most common ADR was hyponatremia occurring in 29 cases (8.4%). Eight of the hyponatremic cases were asymptomatic. Symptoms were resolved or slightly improved within 4 weeks of onset in 13 of 29 cases of hyponatremia. In addition, hyponatremia occurred in 11 of 217 cases (5.1%), with a serum sodium level before the administration of desmopressin of ≥140 mmol/L, and in 13 of 87 cases (14.9%), with a level of 135-139 mmol/L, and was not measured in 5 hyponatremia cases. Patient characteristics that showed significant differences in the occurrence of hyponatremia included body weight, body mass index, renal function, and pretreatment serum sodium level. Regular monitoring of serum sodium is necessary for early detection of hyponatremia. CONCLUSIONS: Hyponatremia was the most common ADR when desmopressin orally disintegrating tablets were used to treat nocturia due to nocturnal polyuria over a 12-week period.

Enhancing Sperm Motility Parameters in Patients with Asthenospermia: A Combined Approach of Acupuncture at Fusiguan Point and Tamoxifen Citrate Tablets.

OBJECTIVE: To explore the effect of acupuncture at Fuguan point combined with tamoxifen citrate tablet on sperm motility parameters. METHODS: A total of 115 individuals with asthenospermia were categorized based on different treatment regimens: 53 patients in the control group (receiving tamoxifen citrate tablets) and 62 patients in the observation group (undergoing acupoint acupuncture in conjunction with tamoxifen citrate tablets). Both groups underwent a 3-month treatment period. The computer-assisted sperm analysis system was employed to measure various motility parameters of human sperm, including sperm motility rate, average path velocity (VAP), lateral swing amplitude (ALH), percentage of class a sperm, and percentage of class a + b sperm. RESULTS: Prior to treatment, no statistically significant differences were observed between the two groups in terms of sperm motility rate, VAP, ALH, percentage of class a sperm, and percentage of class a + b sperm (p > 0.05). Following treatment, both groups exhibited significant enhancements in sperm motility rate, VAP, ALH, percentage of class a sperm, and percentage of class a + b sperm compared to pretreatment levels (p < 0.05). Furthermore, all measured indicators in the observation group demonstrated significantly superior improvements than those of the control group, with the differences proving statistically significant (p < 0.05). CONCLUSIONS: The combination of acupuncture at Fusiguan point and tamoxifen citrate tablets exerts a notably positive effect on sperm motility in individuals diagnosed with asthenospermia.

Isoquinoline-based intrinsic fluorescence assessment of erythropoiesis-stimulating agent, Roxadustat (FG-4592), in tablets: applications to content uniformity and human plasma evaluation.

In the present study, a first validated and green spectrofluorimetric approach for its assessment and evaluation in different matrices was investigated. After using an excitation wavelength of 345 nm, Roxadustat (ROX) demonstrates a highly native fluorescence at an emission of 410 nm. The influences of experimental factors such as pH, diluting solvents, and different organized media were tested, and the most appropriate solvent choice was ethanol. It was confirmed that there was a linear relationship between the concentration of ROX and the relative fluorescence intensity in the range 60.0-1000.0 ng ml-1, with the limit of detection and limit of quantitation, respectively, being 17.0 and 53.0 ng ml-1. The mean recoveries % [±standard deviation (SD), n = 5] for pharmaceutical preparations were 100.11% ± 2.24%, whereas for plasma samples, they were 100.08 ± 1.08% (±SD, n = 5). The results obtained after the application of four greenness criteria, Analytical Eco-Scale metric, NEMI, GAPI, and AGREE metric, confirmed its eco-friendliness. In addition, the whiteness meter (RGB12) confirmed its level of sustainability. The International Council for Harmonisation (ICH) criteria were used to verify the developed method through the study in both spiked plasma samples and content uniformity evaluation. An appropriate standard for various applications in industry and quality control laboratories was developed.

A Method for the Tensile Strength Prediction of Tablets with Differing Powder Plasticities.

Tablets are the most commonly used dosage form in the pharmaceutical industry, and their properties such as disintegration, dissolution, and portability are influenced by their strength. However, in industry, the mixing fraction of powders to obtain a tablet compact with sufficient strength is determined based on empirical rules. Therefore, a method for predicting tablet strength based on the properties of a single material is required. The objective of this study was to quantitatively evaluate the relationship between the compression properties and tablet strength of powder mixtures. The compression properties of the powder mixtures with different plasticities were evaluated based on the force-displacement curves obtained from the powder compression tests. Heckel and compression energy analyses were performed to evaluate compression properties. During the compression energy analysis, the ratio of plastic deformation energy to elastic deformation energy (Ep/Ee) was assumed to be the plastic deformability of the powder. The quantitative relationship between the compression properties and tensile strength of the tablets was investigated. Based on the obtained relationship and the compression properties of a single material, a prediction equation was put forward for the compression properties of the powder mixture. Subsequently, a correlation equation for tablet strength was proposed by combining the values of K and Ep/Ee obtained from the Heckel and compression energy analyses, respectively. Finally, by substituting the compression properties of the single material and the mass fraction of the plastic material into the proposed equation, the tablet strength of the powder mixture with different plastic deformabilities was predicted.

Shoulder pain management strategies and early functional outcome after arthroscopic rotator cuff tear repair. A randomized controlled study.

BACKGROUND: The management of acute postoperative pain after rotator cuff surgery can be challenging. To our knowledge, there are no data available in the literature correlating satisfactory pain control with improvement in terms of function. The purposes of the present study were to evaluate: 1) pain pattern after arthroscopic rotator cuff repair in patients operated with two different techniques (transosseous vs transosseous equivalent); 2) safety/efficacy of three different pharmacological pain control strategies; 3) possible relationship between a correct shoulder pain management protocol in the early post-operative period and patients' functional improvement. METHODS: 114 patients underwent rotator cuff tear repair, either with a Transosseus or a Transosseus equivalent technique. 62 (54%) were male and 52 (46%) were female. The average age was 59 ± 9 years. They were randomly assigned into three different pain management protocols: Paracetamol as needed (max 3 tablets/day) for 1 week (Protocol A), Paracetamol + Codein 1 tablet three times per day for 7 days (Protocol B), or Paracetamol + Ibuprofen 1 tablet two times per day for 7 days (Protocol C). Immediate passive mobilization of the operated shoulder was allowed. VAS and Passive Flexion values were recorded at 7 (T1), 15 (T2) and 30 (T3) days post-surgery. DASH values were recorded at 90 days post-surgery. All patients were asked to register any kind of signs/symptoms that may appear during drug assumption according to each pain management protocols. RESULTS: All the pain management protocols administered were well tolerated by all the study population, and no adverse signs/symptoms were highlighted during drug assumption. Pain pattern: in both surgical techniques, patients within Protocol A were associated with worst results in terms of mean VAS at each time point examined when compared to Protocol B and C (p < 0,05). In patients within Protocol A, no statistically significant differences were found at each point time examined comparing the two surgical techniques, with the exception of T2, where the TO was associated with an higher VAS value than TOE (p < 0.05). No differences were highlighted in Protocol B and C when comparing the values between two surgical techniques. ROM: in both surgical techniques, patients within Protocol A were associated with worst results in terms of mean PROM at each time point examined when compared to Protocol B and C (p < 0,05). In the TO group, patients within Protocol B had better PROM values at T1 (p < 0,05) and T2 (p < 0,05) compared to Protocol C, but no differences were highlighted at T3. In the TOE group, no statistically significant differences were found between patients within Protocol B and C at each time point examined. DASH: In the TO group, no statistically significant differences were found regarding the DASH values comparing Protocol B vs Protocol C, but they were highlighted comparing the values between Protocol A and Protocol B (p < 0,05), and between Protocol A and Protocol C (p < 0,05). Similar results were recorded in the TOE group. CONCLUSION: Post-operative pain is influenced by the surgical technique used being transosseous more painful in the first 15 days after surgery. Oral anti-inflammatory drugs are a feasible strategy to appropriately control post-operative pain. An association between Paracetamol and either Codein or Ibuprofen can lead to better outcomes in terms of VAS reduction and early recovery of passive ROM.

SINGLE-DOSE, MULTIPLE-DOSE, AND THERAPEUTIC DRUG MONITORING PHARMACOKINETICS OF FIROCOXIB IN ASIAN ELEPHANTS (ELEPHAS MAXIMUS).

Firocoxib is a COX-2-selective nonsteroidal anti-inflammatory drug (NSAID) with limited effects on COX-1, which means it likely has fewer side effects than typically associated with other NSAIDs. This study determined possible doses of firocoxib based on single- and multidose pharmacokinetic trials conducted in 10 Asian elephants (Elephas maximus). Initially, two single oral dose trials (0.01 and 0.1 mg/kg) of a commercially available tablet (n = 6) and paste (n = 4) formulation were used to determine a preferred dose. The 0.1 mg/kg dose was further evaluated via IV single dose (n = 3) and oral multidose trials (tablets n = 6; paste n = 4). Serum peak and trough firocoxib concentrations were also evaluated in Asian elephants (n = 4) that had been being treated for a minimum of 90 consecutive days. Key pharmacokinetic parameters for the 0.1 mg/kg single-dose trials included mean peak serum concentrations of 49 ± 3.3 ng/ml for tablets and 62 ± 14.8 ng/ml for paste, area under the curve (AUC) of 1,332 ± 878 h*mg/ml for tablets and 1,455 ± 634 h*mg/ml for paste, and half-life (T1/2) of 34.3 ± 30.3 h for tablets and 19.9 ± 12.8 h for paste. After 8 d of dosing at 0.1 mg/kg every 24 h, pharmacokinetic parameters stabilized to an AUC of 6,341 ± 3,003 h*mg/ml for tablets and 5,613 ± 2,262 for paste, and T1/2 of 84.4 ± 32.2 h for tablets and 62.9 ± 2.3 h for paste. Serum COX inhibition was evaluated in vitro and ex vivo in untreated elephant plasma, where firocoxib demonstrated preferential inhibition of COX-2. No adverse effects from firocoxib administration were identified in this study. Results suggest administering firocoxib to Asian elephants at a dose of 0.1 mg/kg orally, using either tablet or paste formulations, every 24 h.

Exploration of the in vitro Antiviral Effects and the Active Components of Changyanning Tablets Against Enterovirus 71.

Purpose: This study aims to investigate the in vitro antiviral effects of the aqueous solution of Changyanning (CYN) tablets on Enterovirus 71 (EV71), and to analyze its active components. Methods: The in vitro anti-EV71 effects of CYN solution and its herbal ingredients were assessed by testing the relative viral RNA (vRNA) expression level and the cell viability rates. Material basis analysis was performed using HPLC-Q-TOF-MS/MS detection. Potential targets and active components were identified by network pharmacology and molecular docking. The screened components were verified by in vitro antiviral experiments. Results: CYN solution exerted anti-EV71 activities as the vRNA is markedly reduced after treatment, with a half maximal inhibitory concentration (IC50) of 996.85 µg/mL. Of its five herbal ingredients, aqueous extract of Mosla chinensis (AEMC) and leaves of Liquidambar formosana Hance (AELLF) significantly inhibited the intracellular replication of EV71, and the IC50 was tested as 202.57 µg/mL and 174.77 µg/mL, respectively. Based on HPLC-Q-TOF-MS/MS results, as well as the comparison with the material basis of CYN solution, a total of 44 components were identified from AEMC and AELLF. Through network pharmacology, AKT1, ALB, and SRC were identified as core targets. Molecular docking performed between core targets and the components indicated that 21 components may have anti-EV71 effects. Of these, nine were selected for in vitro pharmacodynamic verification, and only rosmarinic acid manifested in vitro anti-EV71 activity, with an IC50 of 11.90 µg/mL. Moreover, rosmarinic acid can stably bind with three core targets by forming hydrogen bonds. Conclusion: CYN solution has inhibitory effects on EV71 replication in vitro, and its active component was identified as rosmarinic acid. Our study provides a new approach for screening and confirmation of the effective components in Chinese herbal preparation.

Dissolution Profiles of Oral Disintegrating Tablet with Taste Masking Granule Polymer Coating in Biorelevant Bicarbonate Buffer.

The current study aimed to explore the impact of buffer species on the dissolution behavior of orally disintegrating tablets (ODT) containing a basic polymer and its influence on bioequivalence (BE) prediction. Fexofenadine hydrochloride ODT formulations were used as the model formulations, Allegra® as the reference formulation, and generic formulations A and B as the test formulations. Allegra®, generic A, and generic B are ODT formulations that contain aminoalkyl methacrylate copolymers E (Eudragit® E, EUD-E), a basic polymer commonly used to mask the bitter taste of drugs. Both generic A and generic B have been known to be bioequivalent to Allegra®. The dissolution tests were conducted using a compendial paddle, with either bicarbonate (10 mM, pH 6.8) or phosphate buffer (25 mM, pH 6.8) as the dissolution media. A floating lid was employed to cover the surface of the bicarbonate buffer to prevent volatilization. Results indicated that in phosphate buffer, the dissolution profiles of Allegra and generic B significantly varied from that of generic A, whereas in the bicarbonate buffer, the dissolution profiles of Allegra, generic A, and generic B were comparable. These findings suggest that the use of bicarbonate buffer may offer a more precise prediction of human bioequivalence compared to phosphate buffer.

Demonstrating Bioequivalence for Two Dose Strengths of Niraparib and Abiraterone Acetate Dual-Action Tablets Versus Single Agents: Utility of Clinical Study Data Supplemented with Modeling and Simulation.

BACKGROUND AND OBJECTIVE: The combination of niraparib and abiraterone acetate (AA) plus prednisone is under investigation for the treatment of patients with metastatic castration-resistant prostate cancer (mCRPC) and metastatic castration-sensitive prostate cancer (mCSPC). Regular-strength (RS) and lower-strength (LS) dual-action tablets (DATs), comprising niraparib 100 mg/AA 500 mg and niraparib 50 mg/AA 500 mg, respectively, were developed to reduce pill burden and improve patient experience. A bioequivalence (BE)/bioavailability (BA) study was conducted under modified fasting conditions in patients with mCRPC to support approval of the DATs. METHODS: This open-label randomized BA/BE study (NCT04577833) was conducted at 14 sites in the USA and Europe. The study had a sequential design, including a 21-day screening phase, a pharmacokinetic (PK) assessment phase comprising three periods [namely (1) single-dose with up to 1-week run-in, (2) daily dose on days 1-11, and (3) daily dose on days 12-22], an extension where both niraparib and AA as single-agent combination (SAC; reference) or AA alone was continued from day 23 until discontinuation, and a 30-day follow-up phase. Patients were randomly assigned in a parallel-group design (four-sequence randomization) to receive a single oral dose of niraparib 100 mg/AA 1000 mg as a LS-DAT or SAC in period 1, and patients continued as randomized into a two-way crossover design during periods 2 and 3 where they received niraparib 200 mg/AA 1000 mg once daily as a RS-DAT or SAC. The design was powered on the basis of crossover assessment of RS-DAT versus SAC. During repeated dosing (periods 2 and 3, and extension phase), all patients also received prednisone/prednisolone 5 mg twice daily. Plasma samples were collected for measurement of niraparib and abiraterone plasma concentrations. Statistical assessment of the RS-DAT and LS-DAT versus SAC was performed on log-transformed pharmacokinetic parameters data from periods 2 and 3 (crossover) and from period 1 (parallel), respectively. Additional paired analyses and model-based bioequivalence assessments were conducted to evaluate the similarity between the LS-DAT and SAC. RESULTS: For the RS-DAT versus SAC, the 90% confidence intervals (CI) of geometric mean ratios (GMR) for maximum concentration at a steady state (Cmax,ss) and area under the plasma concentration-time curve from 0-24 h at a steady state (AUC 0-24h,ss) were respectively 99.18-106.12% and 97.91-104.31% for niraparib and 87.59-106.69 and 86.91-100.23% for abiraterone. For the LS-DAT vs SAC, the 90% CI of GMR for AUC0-72h of niraparib was 80.31-101.12% in primary analysis, the 90% CI of GMR for Cmax,ss and AUC 0-24h,ss of abiraterone was 85.41-118.34% and 86.51-121.64% respectively, and 96.4% of simulated LS-DAT versus SAC BE trials met the BE criteria for both niraparib and abiraterone. CONCLUSIONS: The RS-DAT met BE criteria (range 80%-125%) versus SAC based on 90% CI of GMR for Cmax,ss and AUC 0-24h,ss. The LS-DAT was considered BE to SAC on the basis of the niraparib component meeting the BE criteria in the primary analysis for AUC 0-72h; abiraterone meeting the BE criteria in additional paired analyses based on Cmax,ss and AUC 0-24h,ss; and the percentage of simulated LS-DAT versus SAC BE trials meeting the BE criteria for both. GOV IDENTIFIER: NCT04577833.

Safety, Tolerability, and Pharmacokinetics of the Monoamine Oxidase B Inhibitor, HEC122505, and its Major Metabolite After Single- and Multiple- Ascending Dose, and Food Effect Study in Healthy Chinese Subjects.

BACKGROUND AND OBJECTIVES: HEC122505 is a potent and selectively monoamine oxidase B inhibitor that is safe and well-tolerated in preclinical models of Parkinson's disease. The objectives of single ascending dose and multiple dose pharmacokinetic trials of HEC122505 oral tablets were to determine the safety and tolerability of HEC122505, and to examine the food effect on the pharmacokinetic parameters of HEC122505 and its major metabolite HEC129870. METHODS: The phase I study (NCT04625361) consisted of three arms: single ascending dose study (5, 20, 50, 100, 200, 300 or 400 mg HEC122505 tablets or placebo), multiple ascending dose study (20, 50 or 100 mg HEC122505 tablets or placebo once daily), and food effect (100 mg HEC122505 tablets single dose after a high-fat, high-calorie meal). All subjects completed all trial arms and were analyzed as planned. RESULTS: Pharmacokinetic analysis showed that HEC122505 rapidly absorbed with the time to peak plasma concentration (Tmax) ranged from 0.5 to 1.75 h. In addition, maximum plasma drug concentration (Cmax) and area under the plasma concentration-time curve (AUC) increased in a dose proportional manner. Food effect study showed that a high-fat, high-calorie meal had no significant effect on the pharmacokinetics of HEC122505 and its major metabolite HEC129870, suggesting that HEC122505 could be administered in both fasted and fed state in clinical trials. The subsequent multiple-dose study evaluated doses from 20 to 100 mg dose once daily for up to 8 days. HEC122505 reached steady state after approximately 5 days with a once daily dose. In these studies, all dose of HEC122505 was generally safe and well tolerated. No grade ≥ 3 drug related adverse events (AEs) occurred. CONCLUSION: HEC122505 was generally safe and well tolerated in the single ascending dose (ranging from 5 to 400 mg) and multiple ascending dose (50 to 200 mg once daily doses) studies. All the drug related adverse events (AEs) were Grade ≤ 2. There were no deaths, no subjects discontinued the trial due to AEs, and there were no other serious AEs. The safety and pharmacokinetic profile support once daily administration of HEC122505.

Magnetic Resonance Imaging Evidence Supporting the Efficacy of Cladribine Tablets in the Treatment of Relapsing-Remitting Multiple Sclerosis.

Numerous therapies are currently available to modify the disease course of multiple sclerosis (MS). Magnetic resonance imaging (MRI) plays a pivotal role in assessing treatment response by providing insights into disease activity and clinical progression. Integrating MRI findings with clinical and laboratory data enables a comprehensive assessment of the disease course. Among available MS treatments, cladribine is emerging as a promising option due to its role as a selective immune reconstitution therapy, with a notable impact on B cells and a lesser effect on T cells. This work emphasizes the assessment of MRI's contribution to MS treatment, particularly focusing on the influence of cladribine tablets on imaging outcomes, encompassing data from pivotal and real-world studies. The evidence highlights that cladribine, compared with placebo, not only exhibits a reduction in inflammatory imaging markers, such as T1-Gd+, T2 and combined unique active (CUA) lesions, but also mitigates the effect on brain volume loss, particularly within grey matter. Importantly, cladribine reveals early action by reducing CUA lesions within the first months of treatment, regardless of a patient's initial conditions. The selective mechanism of action, and sustained efficacy beyond year 2, combined with its early onset of action, collectively position cladribine tablets as a pivotal component in the therapeutic paradigm for MS. Overall, MRI, along with clinical measures, has played a substantial role in showcasing the effectiveness of cladribine in addressing both the inflammatory and neurodegenerative aspects of MS.

Development of a simple paste for 3D printing of drug formulations containing a mesoporous material loaded with a poorly water-soluble drug.

Poorly soluble drugs represent a substantial portion of emerging drug candidates, posing significant challenges for pharmaceutical formulators. One promising method to enhance the drug's dissolution rate and, consequently, bioavailability involves transforming them into an amorphous state within mesoporous materials. These materials can then be seamlessly integrated into personalized drug formulations using Additive Manufacturing (AM) techniques, most commonly via Fused Deposition Modeling. Another innovative approach within the realm of AM for mesoporous material-based formulations is semi-solid extrusion (SSE). This study showcases the feasibility of a straightforward yet groundbreaking hybrid 3D printing system employing SSE to incorporate drug-loaded mesoporous magnesium carbonate (MMC) into two different drug formulations, each designed for distinct administration routes. MMC was loaded with the poorly water-soluble drug ibuprofen via a solvent evaporation method and mixed with PEG 400 as a binder and lubricant, facilitating subsequent SSE. The formulation is non-aqueous, unlike most pastes which are used for SSE, and thus is beneficial for the incorporation of poorly water-soluble drugs. The 3D printing process yielded tablets for oral administration and suppositories for rectal administration, which were then analyzed for their dissolution behavior in biorelevant media. These investigations revealed enhancements in the dissolution kinetics of the amorphous drug-loaded MMC formulations. Furthermore, an impressive drug loading of 15.3 % w/w of the total formulation was achieved, marking the highest reported loading for SSE formulations incorporating mesoporous materials to stabilize drugs in their amorphous state by a wide margin. This simple formulation containing PEG 400 also showed advantages over other aqueous formulations for SSE in that the formulations did not exhibit weight loss or changes in size or form during the curing process post-printing. These results underscore the substantial potential of this innovative hybrid 3D printing system for the development of drug dosage forms, particularly for improving the release profile of poorly water-soluble drugs.